Mining residue as raw material for bricks and tiles

Each year in Germany, some 15 million tons of fine particles from gravel washing plants are collected mainly in huge tailings ponds. Across Central Europe, roughly 60 million tons of such material is estimated to accrue per year.

By comparison: German heavy clay plants consumed 8.2 million tons of raw material in 2008.

In the intention of doing something about the wasteful use of resources, Germany‘s Federal Institute for Geosciences and Natural Resources (BGR) recently conducted a study in which most such sludge was found to be potentially useful for the brick and tile industry. The particle size spectrum of such material matches up very closely with that of normal everyday heavy clay body.

There is a hitch, though: In order to make plastic filter cake from thick sludge, the gravel plant operators would need to invest large sums in membrane filter presses.

On the other hand, there is also plenty of dry residue to go around. More than 800 stone quarries in Germany alone produce millions of tons of unused filler and fine screenings. Some of that material could contribute significantly toward reducing the cost of ceramic production processes. With a view to intensifying this very interesting subject, pertinent discussions are being held with Germany‘s Federal Association for Mineral-base Raw Material Producers (Bundesverband Mineralische Rohstoffe – MIRO).

According to the EU Directive on resource conservation and to the German government‘s own sustainability concept, raw material mining needs to be strictly limited. The German Federal Environmental Agency even sees future raw material being recycled from the contents of anthropogenic waste stores – a process referred to as “urban mining”.

Even before things get that far, however, the brick and tile industry can actively contribute to the conservation of resources by exploiting suitable mining residues. That is good for the environment as well as for for one‘s image. It would also provide a convincing rationale for the indispensable coexistence of regional clay pits.

There is no use trying to achieve goals that run counter to the current of time, and it does not feel good, either. Conversely, going with the times feels good and is usually even easy.

 

Yours,
EurGeol Dr. Lutz Krakow
Managing partner, ClayServer GmbH
x

Related articles:

Issue 11/2012

Turning mining residue into raw material for bricks and tiles – part II: rock flour and crusher dust from natural stone processing

On February 29, 2012, the German federal cabinet enacted the country‘s new resource efficiency program (ProgRess). Due to its enormous consumption of resources, the construction sector is a relevant...

more
Ceramitec 2009: 20 to 23 October, Munich

Energy-efficient solutions for heavy clay and fine ceramics

Given the strained state of the overall economy, all segments of the fine and heavy clay ceramics industry are under renewed pressure to cut costs. As a result, the topics of material and energy...

more
Issue 07/2009 Ceramitec 2009: 20 to 23 October, Munich

Energy-efficient solutions for heavy clay and fine ceramics

Given the strained state of the overall economy, all segments of the fine and heavy clay ceramics industry are under renewed pressure to cut costs. As a result, the topics of material and energy...

more
Issue 1-2/2012

Resource efficiency in the clay brick and roofing tile industry Part I: General introduction

1 Numbers and facts Around 60 bill. t/pa abiotic raw materials (mineral resources, energy resources, ores) are consumed worldwide today, almost 50% more than in 1980, with an upwards trend. The...

more
Issue 7/2015

Resource efficiency in brick and tile industry – background and practical examples

Approval procedures for the extraction of new raw materials are becoming increasingly difficult. Today, the European nature protection directive Natura 2000 has led to a complex network of...

more