Ceramifor supplies intermittent kiln for the Wienerberger Group

Ceramifor provides solutions for the ceramics industry, supplying high-performance and high-efficiency kilns for porcelain ­tableware, ceramic sanitaryware, earthenware and stoneware, insulators, technical ceramics, abrasives and heavy clay products.

With more than 30 years of experience and 5000 kilns supplied worldwide (tunnel, shuttle and elevator kilns), its focus is to offer the best solutions to client’s needs, using the most advanced project techniques, reference materials and equipment.

Recently Ceramifor was selected to supply a special chamber kiln to the Wienerberger Group. This 41-m3 chamber kiln is equipped with the latest technology for atmosphere control, including iKCS (Ceramifor’s own control system). This system assures operational reliability, control and efficiency for all firing applications.

Hall A2, Stand 205/306

x

Related articles:

Issue 1/2020 M.Sc. Tino Redemann, Prof. Dr.-Ing. Eckehard Specht

Simulation of the firing of ceramic ware Part 1: Understanding the firing process in tunnel kilns

1 Introduction The production of building ceramics such as clay pavers, facing and hollow bricks and roof tiles is an energy-intensive process. Drying and firing in industrial practice require on...

more
Issue 4/2020 Keramischer Ofenbau

EnerViT plus firing system ready for the market

The EnerViT firing system from Keramischer Ofenbau is now successfully in operation in over 35 kilns. Fields of application are oxidation-firing, gas-heated roller and tunnel kilns with firing...

more
Issue 5/2016

Technofast and Tradifast kilns from Cleia

The French plant engineering company Cleia offers two technologies for air-tight refractory kilns: the Technofast kiln and the Tradifast kiln. The air-tightness of the kilns is ensured by fully...

more
Issue 08/2009

Heat recovery with flue gas heat exchangers on ceramic kilns

1 General Hot flue gases from ceramic kilns can rarely be directly exploited as heat sources for other parts of plant, because they are always more or less heavily contaminated with undesirable...

more
Issue 6/2018

New concept for improving heat transfer in tunnel kilns

Ceramic products have to be fired before they can be used, and tunnel kilns are well-suited for the job. To help optimize a kiln‘s energy efficiency, fans can be installed in the preheating and...

more