Converting prefab masoning units from mortar to adhesives

Due to the fact that demand for cemented masonry has been expanding in recent years, Rimatem GmbH, as a producer of prefab masonry units, has engineered a new adhesive applicator for perfectly ­cementing all kinds of clay masonry units – including vertically perforated bricks and blocks.

The new application system is modular, and all masoning-unit generations from HA III (i.e., built in 1998 and later) can be easily converted for using adhesives instead of mortar. Considering that the HA IV can be converted from one technique to the other in just a few minutes‘ time, the user can practically employ both methods at once. All the conversion involves is to dismount one applicator and replace it with the other – the machine takes over from there. Everything is fully automated, from extracting the material from the silo to mixing the adhesive or mortar and, finally, loading it into the applicator.

Any arbitrary adhesive can be used for normal cementing. For the full-face option, such as in the case of vertically perforated bricks/blocks, however, the adhesive agent must exhibit certain properties. Rimatem specialists are happy to help users select and adjust the most appropriate agent.

x

Related articles:

Issue 03/2011

An out-of-the-ordinary conversion – from concrete precasting facility to prefab wall system plant

The family-owned and ?operated enterprise dws-prefab used to be exclusively focused on constructing carcasses for multi-storey and individual residential buildings. The company produced the requisite...

more
Issue 01/2015 Dipl.-Ing. (FH) Ekkehart Pichler

Composite mortar taping – a new wall-building system for economically efficient placement of brick masonry

1 Introduction Ever since people began erecting brick buildings, the employed type of mortar has had an impact on the available range of architectural alternatives. In Mesopotamia, where bricks were...

more
Issue 03/2011

Bonding masonry bricks with Wienerberger’s innovative Dryfix system

The requirements for planning and building houses have developed strongly in recent years. Besides structural-physical qualities, a faster, less complicated and therefore more cost-efficient use is...

more
Issue 1/2017

Franken Maxit: Mortar innovations

The mortar pad launched at Bau 2015 is now available for interior walls: Besides the sizes 42 x 30, 36 x 24 and 19.5 x 36 cm for exterior walls, the dry mortar pads are now available in more...

more

Franken Maxit: Mortar innovations

The mortar pad launched at Bau 2015 is now available for interior walls: Besides the sizes 42 x 30, 36 x 24 and 19.5 x 36 cm for exterior walls, the dry mortar pads are now available in more slender...

more