Frost resistance of ceramic building materials – factors of influence, standards and new test methods (Part 1)

This contribution provides information on major methods of characterizing the frost resistance of ceramic building materials. Testing is performed according to the standards-compliant, product-specific method of frost simulation in refrigeration units, e.g., in chest freezers. A test method devised at KI Keramik-Institut GmbH allows supplementary quantification of how product modifications and changes in technology affect frost resistance, independent of any defects established via frost simulation. Part 1 surveys the basic principles and applicable standards. Part 2, in which the test results will be presented, is scheduled to appear in Zi5/2013.

1 Introduction

For producers and users alike, frost damage on heavy clay products is a latent hazard that can be avoided by appropriately optimizing the product and the employed production technology. Frost resistance is demonstrated by means of special test methods. Due to the complexity and, in part, to the duration of the frost-exposure processes, product-specific loads and stresses are generated, with frost-induced defects occurring as a result. This is accounted for by product group-appropriate test conditions in the form of standard specifications. The tests are based on frost simulation...

Related articles:

Issue 05/2013

Frost resistance of ceramic building materials – factors of influence, standards and new test methods (Part 2)

5 Test method pore-size distribution (PSD) and frost damage Frost resistance is decisively dependent on tensile strength, porosity and pore-size distribution. In principle, low porosity and high...

more
Issue 04/2014

Frost resistance testing of structural ceramics by means of low-temperature dilatometry

1 Introduction Time and again, ceramic products in outdoor applications suffer frost-induced damage despite standards-compliant product characteristics, successful frost resistance testing and correct...

more
Issue 04/2014

Lucideon invests in new freeze-thaw test rig

The new rig specifically meets the revised BS EN 539-2 standard “Frost resistance test method requirements for clay roofing tiles” and has the capability to test to the existing natural stone...

more
Issue 11/2012

Frost resistance of bricks – factors of ­influence, test methods and standards

Clay roofing tiles, clay pavers, facing bricks and clinkers have to be freeze/thaw resistant to permanently fulfil their intended structural functions. Frost damage is much-feared, because it can have...

more
Issue 11/2013

Frost resistance testing of structural clay products by means of low-temperature dilatometry

This paper delves into the mechanisms of action between the physical properties and the frost resistance of structural clay products. By reason of their outdoor application range, such structural clay...

more