Bedeschi Automation revamps Nova Sloga, Resen, Macedonia

One of the latest Bedeschi projects was realized at Nova Sloga in Macedonia. The major industrial group Oran­zerii Hamzali, of which Nova Sloga is a subsidiary, has first-class contacts to the Bedeschi Group through its owner Vase Mitev. In 2009, Bedeschi installed the entire preparation, storage and shaping lines for hollow and ceiling blocks of various types.

The now completed investment was made with the goal of improving the product quality and increasing production capacity.

The order comprises a new cutter group, a robotized station for loading the wet products onto the pallet of the dryer car, two robotized stations for setting the dried products onto kiln cars and four robotized stations for unloading the fired products and stacking the finished products onto pallets. All these robotized stations are equipped with different grippers for different types of products, which were all designed and manufactured within the Bedeschi Group. For some months now, Cami, a long-established manufacturer of grippers, has also been part of the Bedeschi Group.

VHTBED electronic cutter

Also installed is the VHTBED electronic cutter. This was designed and manufactured to cut bricks, blocks, hollow bricks, extra-long hollow ware, flues and chamfered bricks. The machine can perform vertical and horizontal cuts. In the single-wire configuration, the cutting length can be set directly from the control panel without any additional adjustment necessary at the machine itself.

The column treatment system developed for this machine can adapt to the cut frequency with the possibility of chamfering the brick; moreover, being located in the step preceding the cut, it works extremely accurately. The machine is equipped with a wire cleaning system as well as with an electronic control system for wire breakage. The spacing of the cut pieces is performed immediately after the cutting step by means of a system of belts driven by a brushless motor. All the elements of brushless moving components are integrated in an electronic control system.

Bedeschi S.p.A.


Related articles:

Issue 8/2015

Bedeschi installs VHTBED electronic cutter at KM Beta Cihelna Hodonin

Bedeschi Spa, the Italian plant engineering company, continues to invest in research and technical advances, launching successful new products onto the marketplace. In recent months, many new...

Issue 7/2016 Revdinskiy Kirpicniy Zavod, Swerdlowsk, Russia

Facing bricks and hollow blocks – produced on one line

1 Introduction The brick plant was officially inaugurated on 13 March 2016, the ceremony being attended by Evgeniy Kuyvashev, the Sverdlovsk Region Governor, Andrey Kozicin, General Manager of the...

Issue 2/2016 Briqueterie Altrapco EURL, Bordj-Bou-Arreridj, Algeria

New flexible plant for Altrapco can produce ceiling and hollow blocks

1 Introduction Equipceramic‘s electronic department has developed and integrated a modern EQC-APP system tailored to the customer’s requirements. This offers a string of advantages at factory...

Issue 7/2016

Algeria‘s Amouri Group chooses Bedeschi S.p.A. once again

The Amouri Group, a leading manufacturer of hollow and ceiling blocks in Algeria, is again relying on the Italian technology engineered by Bedeschi S.p.A.. At present, around 20 e­xtruders...

Issue 2/2018 Bongioanni Macchine | B5,101/202

Innovative electronic control system

To enable customers to cut energy costs while reducing component wear and enhancing safety and ease of use, Bongioanni Macchine is presenting an innovative electronic control system. At the stand,...