Dr.-Ing. Stefan Vogt

Benefits and boundary conditions of fast firing clay building products (Part 2)

This contribution is the last of four articles dealing with kiln settings in terms of pressure drop, flow distribution, convective heat transfer and optimal configuration, as well as with the boundary conditions and benefits of fast-firing kilns for clay building products [1-4]. Part 2 of this tripartite article describes the sizing of fast firing kilns.

4 Sizing of fast firing kilns

In this installment, an attempt is made to define the dimensions of future, thermally optimized fast firing kilns and their accoutrements according to present best-practice expertise and to the firing times postulated in item 2.

4.1 Sizing the firing channel

Nearly all clay product formats commonly employed in Europe and the USA can be fired in firing channels of similar size and dimensions by varying the number of hearths and/or the number of products per hearth. This is of particular importance for future fast firing kilns, which will be intended to handle as...

Related articles:

Issue 4/2018 Dr.-Ing. Stefan Vogt

Do counterflow kilns hold the promise of an energy miracle? (Part 1)

1 Introduction According to research by Böger [2], Carl Emmel was awarded German Imperial Patent No. 13604 on May 1, 1880, for his counterflow kiln. The first reference to a foreign patent found by...

more
Issue 5/2018 Dr.-Ing. Stefan Vogt

Do counterflow kilns hold the promise of an energy miracle? (Part 2)

6 Counterflow kiln with forced circulation In the interest of ongoing development for counterflow kilns, the transition to forced circulation with the aid of supplementary circulation fans (»4) would...

more
Issue 5/2017 Dr.-Ing. Stefan Vogt

Benefits and boundary conditions of fast firing clay building products (Part 1)

“… the further development of tunnel kilns for firing clay products has always been and still remains geared to fast firing as a long-term objective“ - Karsten Junge [13].   1 Introduction Clay...

more
Issue 1/2018 Dr.-Ing. Stefan Vogt

Benefits and boundary conditions of fast firing clay building products (Part 3)

5 Economic parameters of fast firing kilns The cost of investment for a conventional tunnel kiln with a daily output of 500 t backing bricks presently comes to around € 4.7 mill., depending on the...

more
Issue 09/2009

The role of the combined heat system in the brick plant

1 Introduction The combined heat system between the kiln and dryer was already used in individual cases at the beginning of the 20th century in large-volume dryers arranged above the annular kiln...

more