EES Energy Efficiency Solutions UG

Efficient reduction of energy costs and emissions

Wanka ion generators (WIGs) ensure optimal thermal conditions for all kinds of combustion processes. They enable efficient reduction of both fuel consumption and pollutant emissions.

The Göttingen-based company Ener­gy Efficiency Solutions has now enginee­red an efficient, compact system that ionizes the molecules of oxygen being fed to the flame along with the combustion air.

In this process, a surplus of negative oxygen ions is released to serve as electrochemical catalysts that accelerate both the velocity and the temperature of the flame, hence reducing fuel consumption by 7 to 15 % and paring down the main pollutant emissions, e.g., NOx, CO and CH, by 40 % on average. The process also lowers the formation of formaldehyde by up to 10 %.

The resultantly improved combustion efficiency substantially diminishes the generation of soot and particulate matter, thus significantly extending both the requisite cleaning intervals and the campaign life of the kiln/furnace. However, the end result is dependent on the quality of the employed fuel.

Due to the inhomogeneity of some fuels, the quality of combustion is direct­ly impacted by any increase in flame velocity and/or flame temperature (by as much as 55 K in the reaction zone). Hence, the oxygen concentration can be reduced to save even more fuel.

Fast return on investment for industrial-scale applications

In one typical large-scale application, i.e., the combustion plant serving an 8.5-t steam boiler at Bitburg Brewery, a series of measurements conducted over several months showed that the ion generator yielded fuel savings (heavy fuel oil) on the order of 9 % while reducing CO and NOx emissions by 71  and 31 %, respectively. The system paid for itself within a year.

According to the results of test-record analysis relevant to WIG Wanka ion generators installed in biogas plants, the savings on fuel there amount to around 8 %.

The WIG-MAXI compact system is cur­rently designed for rated thermal out­puts up to 40 MW. Depending on the nature of the employed firing system, com­bustion plants with thermal outputs bet­ween 4 and 40 MW require two or three WIG-MAXI compact systems to take full advantage of their combined performance.

Measuring approx. 80 x 220 x 50 cm, these sturdy WIG systems are made of non-combustible material. Distilled water serving as the ionizing medium is gradually consumed in the course of operation. A WIG system can be installed in a plant’s air intake system either in the course of routine operation or in connection with a brief inspection/maintenance shutdown. It takes a running-in phase of roughly two weeks for the described savings and reduction effects to reach their full impact.

The system’s electronics and gap rods require an annual maintenance inspection. The ionizing medium (distilled H2O) is consumed at an approximate rate of 1000 l/a, and the electronic components together consume roughly 100 W/h.

EES Energy Efficiency Solutions UG
www.eesolutions.de
Wanka ion generator
The Energy Efficiency Solutions company in Göttingen, in cooperation with the patent holder of the former Vapormid-Technik company and present co-owner of EES, Edwin Wanka, Karlsruhe, has engineered an efficient, compact system, the working principle of which is based on the ionization of oxygen molecules and their injection into the flame together with the combustion air.
Originally developed by Edwin Wanka in 1995 as the Vapormid-Technik for industrial rotary kilns, today’s Wanka ion generator design was adapted for use in biomass combustion plants in 2017 in cooperation with Thomas Harbeke, Göttingen.
x

Related articles:

Issue 05/2023

Hydrogen combustion for decarbonization of (high-temperature) process heat

Abstract Climate change and decarbonisation are a significant challenge for energy-intensive industries. In many industries, energy is needed primarily as process heat at very different temperature...

more
Issue 2/2019

Multi-fuel burner for simultaneous combustion of liquid and gaseous biofuels

1 Introduction The recycling and targeted use of biogenic fuels is playing an increasingly important role in the renewable energy market. Decentralized energy resources such as biogas from...

more
Issue 07/2014

Changes in the markets for natural gas and their ­consequences for industrial combustion systems

1 Introduction Natural gas is an important source of energy for many industries. In 2011, about 1/3 of Europe’s gas consumption was due to various industrial applications (excluding power generation)...

more
Issue 6/2020 Eckard Rimpel, Anne Giese, Tim Nowakowski, Tim Schneider, Markus Martl, Christian Siefke, Florian Scherer, Tobias Bem

Improving energy efficiency with the use of hot cooling air in a new combustion concept

1 Starting situation and background In the clay brick and tile industry, modern tunnel kilns achieve the process control necessary to handle high capacities and obtain consistent product qualities...

more
Issue 01/2024

Hydrogen – a future fuel gas for brick plants? (part 1)

1 Introduction To start off, currently available data on the future possibilities and limitations of hydrogen supply were analysed and the necessary requirements for the brick plants elaborated. In...

more