High-porosity mineral foam –
an alternative insulating material

To improve the thermal insulating properties of wall-building materials, thermally insulating materials are introduced into the existing chambers. The currently preferred filling materials for wall-building materials are mineral wool, perlite, mineral granulate, expanded polystyrene particle foam granulate (EPS) and, in isolated cases, resol hard foam. The above-mentioned materials are produced in time- and resource-intensive processes (e.g. high-temperature processes) or sometimes based on petroleum products.

The presented processing and material solution approach concerns the development of a physically produced mineral foam that does not derive its porosity in a chemical gas formation or thermal production process. Instead, air is dispersed in a liquid suspension and the surfaces between liquid and gas phase stabilized with boundary-surface-active substances. The specific combination of hydraulically hardening binders leads to the solidification of the foam structure in less than 10 min. This enables a high filling rate and continuous further processing of the wall-building materials filled with foam.

Because of their comparable thermal insulation properties, physically produced mineral foams are seen as a complement to the existing inorganic thermal insulation materials.

 

Dr.-Ing. Barbara Leydolph, Dipl.-Ing. Attila Höchst

IAB – Institut für Angewandte Bauforschung Weimar gGmbH

x

Related articles:

Issue 6/2012

“Share” – a new insulating material, good for filling bricks, too

1 Idea Geologist Matthias Rimmele is well-known throughout ­Germany’s brick and tile industry as a qualified expert. ­Having gathered 14 years’ experience at his family’s own brick factory in...

more
Issue 6/2017 Franken Maxit GmbH

Maxit’s mineral repair mortar for brick unites thermal insulation with structural stability

At the Bau 2017 in Munich, Franken Maxit introduced a lightweight mineral repair mortar called “maxit therm 825”. Offering both high strength and thermal insulation, this mineral repair mortar is an...

more
Issue 03/2011

Filling plants for innovative heavy clay products with added value

1 Stuffed clay masonry units Schlagmann, the pioneer in the field of stuffed-brick engineering, uses perlite – a natural volcanic rock (»1) – as filling material. The Poroton T9, with its uniformly...

more
Issue 6/2011

Hard shell, soft core – stuffed masonry bricks Part 1 – Progress and thermal insulation

1 Market overview and development With the exception of aerated concrete, which is still only available as a homogeneous mass, the market is full of masonry bricks and blocks (made of clay or...

more
Issue 05/2021

20 years of perlite clay blocks

In 1995, with the introduction of Germany’s 3rd Thermal Insulation Ordinance (WschV), clay blocks reached the limits of their capability with regard to their thermal insulation properties. The...

more