Interim report on the European Silicoat research project

This article provides a concise overview of dust limits (respirable crystalline silica) and their development in Germany and Europe. Subsequently, the positive interim report on the European Silicoat research project is presented.

1 Brief digression

The problem of respirable crystalline silica is not really one anymore! At least, this is the case in Germany and particularly in the German ceramics industry! The Employer’s Liability Insurance Association for the ceramics industry introduced limits back in the early 1950s. These led to increased efforts in the industry to avoid dust, the result was a substantial reduction of silicosis in the industry. Further progress came with the replacement of annular kilns with tunnel kilns and the introduction of the maximum workplace concentration of 0.15 mg per cubic metre respirable...

Related articles:

Issue 11/2013

Progress report on the European SILICOAT research project

As already presented at the Würzburg Brick and Tile Training Course 2012, the project co-financed with European research funds is aimed at reducing the hazard of respirable crystalline silica at the...

more
Issue 11/2012

EU research project on dust

Following a few years’ respite, the subject of respirable silica dust is back on the agenda of the Würzburg Brick and Tile Training Course. There are several reasons for this. First, a European...

more
Issue 08/2014

Interim report on the European research project ­Silicoat

As already reported at the 2012/2013 Würzburg Brick and Tile Training Courses, this EU co-sponsored project is geared to reducing the workplace hazard of respirable crystalline silica. The approach...

more
Issue 6/2015 Lawyer Martin Roth

European Silicoat research project concluded with positive laboratory trials

1 Introduction The project set to run over three years was supported with around € 1 mill. within the 7th Framework Programme of the European Commission. The consortium comprised 11 partners,...

more
Issue 6/2017

Dust – current developments in workplace health and safety limits

This talk addresses the current limits for dust in workplace health and safety regulations. In particular, the new “A” dust limit of 1.25 mg/m3 and the conditions that must be met to qualify for...

more