Sol-Gel process for energy-efficient clay-based building products

1 Context

Adobe building products have very good moisture-regulating properties, enormous heat storage capacity and excellent ecological and economic properties (resource-efficient, reusable, low primary energy content, modest prices). Their lack of water resistance, however, is problematic. In contact with water, adobe building materials lose their strength and shape, because the minerals absorb water and swell.

 

2 Objective

The objective of this research project was to develop a coating with which to prevent contact between clay minerals and liquid water. The coating was, however, supposed to...

Related articles:

Issue 6/2017 Dipl.-Ing. (FH) Alexander Winkel M.Sc.

Coating improves water resistance of adobe surfaces

1 Introduction Compared with other building materials, adobe products offer numerous advantages, including very good: moisture-regulating properties heat storage capacity ecological and economic...

more
Issue 06/2010

Measures for reducing the influence of moisture on the expansion and contraction behaviour and strength losses of industrially fabricated adobe bricks

1 Background The political objective of minimizing the use of fossil fuels, coupled with the economic pressure to which the European brick and tile industry finds itself exposed due to steadily...

more
Issue 8/2015

Sol-Gel process for energy efficient heavy clay products

Adobe bricks and loam rendering are exceptionally ecological and economical products for use in the interior finishing of buildings. Their low resistance to liquid water, however, can be problematic....

more
Technical Paper

Measures for reducing the effects of moisture on expansion and contraction processes and on loss of strength in industrially produced adobe bricks

1 Introduction Earthen architecture has been in renaissance since the 1980s. The days in which people who build homes of clay were belittled as a tree-hugging minority are over. Loam and clay have...

more
Issue 06/2014

Differences in the production-related properties of the three primary clay minerals kaolinite-illite-montmorillonite (Part 2)

4 Shaping properties To this day, there is no uniform laboratory process for measuring plasticity as this is used as a collective term for many complex properties such as viscosity, yield or...

more