Verdés presents new roller grinding lathe

V erdés, the Spanish machine engineering company, has developed a roller grinding lathe with the following key features:

Strong electro-welded steel bed frame with premium rigidity avoiding flexion and vibrations

Tempered chromed steel rails for the carriage

Tool holder carriage with blocking system to operate under the most demanding conditions without vibrations (max. tool displacement is 250 mm)

To shorten the grinding cycle, a clutch system enables quick manual movement of the carriage

Integrated frequency converter installed in an ergonomic control panel with eight speed memories

The control panel can be installed in different configurations according to customer requirements

Assembly of 180 W geared motor has been designed to optimize its protection

To keep the equipment in perfect condition avoiding dust over guides and spindle, the lathe is supplied with a heavy duty canvas cover to protect the machine and control panel when the lathe is not in operation

100% adaptable to Verdés machines, both current and older models

Thanks to the simple design and reduced dimensions, the lathe can be easily adapted to other brand machines


Related articles:

Issue 12/2012

Briqueterie Benabdallah Frères starts with a new clay preparation and shaping line from Verdés

One of the largest brickworks in ­Algeria started production in mid-November: Briqueterie Benabdallah Freres in Zemmouri. For the new plant with a total annual capacity of 560?000 t, Verdés has...

Issue 6/2016

Innovation and optimization

The clay brick and tile industry is known for its conservatism and, once the first few units have been designed and built, it is common for a manufacturer’s equipment to go unchanged for decades,...

Issue 4/2017

Verdés enjoys tremendous success in North America – an overview

In 1984, Verdés took its first steps in the North American market with the installation of a clay preparation line in Selma, Alabama. Prior to that, Verdés had supplied only a few scattered primary...

Issue 8/2015 Dipl. Ing. Diego G. Suárez

Highly efficient grinding for manufacturing added-value products

1 Introduction Market demands for added-value products may be classified in two groups: Aesthetic features Physical or technical properties Within the first group, the visual appearance, colour...

Issue 2/2015

Successful projects for Verdés in Algeria

Thanks to its customers’ confidence, Talleres Felipe Verdés S.A. is continuing its success with further new projects in Algeria. Projects in 2014 In 2014, Verdés commissioned several plants:...