Sto acquires Ströher

On 18 November 2015, Sto SE & Co. KGaA acquired a majority holding in Ströher GmbH headquartered in Dillenburg, Germany. With around 240 employees and annual sales of around € 32 mill., Ströher GmbH is an internationally leading manufacturer of bricks and ceramics for use in high-quality facades and floors indoors and outdoors.
In the segment for brick slips for use on façades and in thermal insulation composite systems, Ströher offers attractive product ranges and comprehensive manufacturing expertise. Ströher GmbH and the Sto Group are planning to widen their activities extensively, especially in the brick slips and thermal insulation composite systems and further improve their respective market positions with their collaboration. To this end the Façades division at Ströher GmbH and the TICS division in the Sto Group will network closely and combine the different product and system strengths. The acquisition is subject to approval by the relevant cartel authorities.


Sto SE & Co. KGaA
www.sto.de
 
Ströher GmbH
www.stroeher.de

x

Related articles:

Issue 4/2019

STO takes over Ströher completely

With effect from 1 July 2019, Managing Partners Gerhard Albert and Patrick Schneider have sold their remaining 49.9% stake in Ströher GmbH to STO SE & Co. KGaA, based in Stühlingen. What started as...

more
Issue 04/2022 Tonality

Dry brick slips

Facades should have a long service life and require as little or no maintenance as possible. In addition, they should reliably protect the building fabric from moisture. And if moisture does...

more
Issue 08/2014

Masonry with external thermal insulation composite systems

External thermal insulation composite systems applied to masonry are highly effective, easily installed and, above all, a cost-efficient means of fulfilling energy efficiency requirements all the way...

more
Issue 04/2009 New from Schlagmann Poroton

Poroton-WDF – the ceramic thermal insulation façade

At Bau 2009 in Munich, Schlagmann presented an ecological façade insulation system: Poroton-WDF is in fact a double-leaf masonry system with rendering (in compliance with DIN 1053-1:1996-11 Section...

more
Issue 6/2018

Influence of the ceramic-related properties on the adhesive bond between brick slips and substructure material

The application of clay brick slips on façade surfaces is to be facilitated with a simplified specification. Basis for this are research findings with brick slips mortared directly onto rendered or...

more