ClickBrick – for a wall without joints

»1 A selection of ClickBricks

»2 A connecting clip is inserted between two bricks

»3 In the middle of the upper side of the brick, clips are also fixed to which the wall ties are attached

»4 All horizontal façade edges have to be glued with a special adhesive

»5 “The Edge”, York, North Yorkshire, Great Britain, built with the “Oakwood” and “Ebonywood” types

»6 An office building built with the “Ebonywood” type in Gendt

»7 For the office building “Union” in Oud-Beijerland, the “Redwood” type was used

With ClickBrick, the Dutch clay brick manufacturer Daas Baksteen has developed a new product that allows facing bricks to be stack-built dry, i.e. without mortar or adhesive. Built without joints, the wall is a straight brick façade. When the bricks are stacked, special clips are inserted that connect the products with each other.

1 ClickBrick system

The ClickBrick system consists of bricks that are specially manufactured with a groove. During building, a stainless steel clip is inserted into the groove for the connection of the bricks with each other.

2 Sizes/planning of the structure

Daas ClickBricks are bricks that are dry stacked and fixed with clips. The bricks are manufactured in such a way that when assembled into a wall, they fit into the modular gauge of the structure. The bricks are available in various standard sizes. On the upper and lower side of each brick is a groove to fasten the clips. Over the height and...