Beralmar

New petcoke combustion chamber

Beralmar come up with a solution for the use of petcoke in hot air generation for dryers.

The new CCP combustion chamber is currently available with a power of up to 3 mill. Kcal/h. It has been designed to overcome the difficulties of petcoke combustion in a closed chamber. Owing to the corrosive characteristics of petcoke and its sulphur content, the combustion fumes must be passed through a heat exchanger coupled to the CCP chamber to enable their use in a dryer for ceramic products, so that the hot air received by the dryer is clean. Therefore, the set consisting of the CCP combustion chamber and the heat exchanger provides a high-quality and cost-effective solution since petcoke, despite its price fluctuations over time, is always significantly cheaper than other fuels such as natural gas or fuel-oil.

In some markets, this solution needs to be accompanied by a particle filter installed in the stack of the heat exchanger to comply with emissions regulations. Beralmar also offers this accessory.

Beralmar had in fact already carried out successful projects with this type of petcoke chamber for some ceramics plants in Spain back in the 1970s and 1980s, so this year’s new CCP chamber was not designed from scratch. In the 1980s, natural gas reached practically every Spanish ceramics plants at a very competitive price, resulting in petcoke chambers falling into disuse. Now that petcoke is again an economically viable solution in many markets after the increase in fuel-oil and natural gas prices, Beralmar is offering this technology once again with a series of improvements. This, added to the quality of the petcoke currently available on the market, makes the new CCP a reliable long-term solution to keep the thermal costs of the drying process down.

It should be noted that due to the high temperature required by petcoke for combustion, the CCP chamber needs to be preheated using a fuel-oil or gas burner. Once the working temperature is reached, the chamber starts to operate 100% with micronized petcoke.

This new solution has already been applied successfully.

Beralmar Tecnologic, S.A.
www.beralmar.com

Related articles:

Issue 4/2016

Beralmar supplies biomass combustion chamber to Cerámica Espíritu Santo

The Spanish company Beralmar has supplied a new solid-fuel combustion chamber, a piece of equipment for which there has been considerable demand in recent years, to the Spanisn company Cerámica...

more
Issue 5/2016

Beralmar supplies new hot air generation system to Morocco

T?he Spanish company Beralmar has supplied a new system for the generation of clean hot air with biomass firing for the Moroccan brickworks Briqueterie Midibriq, Tangiers. A CSD/1500 direct flame...

more
Issue 03/2013 Beralmar receives new orders in Bosnia

Installation of a Promatic installation for l-Crni

Beralmar has received a new order for a solid fuel firing installation. It is a Promatic installation for the company I-Crni, which will be installed at a brick factory in Cazin (Bosnia and...

more
Issue 5-6/2010 Highly efficient, compact and economical

The new Ecomb-TO with Bluemax burner technology from Eisenmann

The Ecomb from Eisenmann thermal oxidation plant is by far one of the most energy-efficient and compact such plant on the market. In addition to lower operating costs, smaller footprint and easier...

more
Issue 09/2013

Beralmar receives order for first solid-fuel firing installation in Kosovo

At a new Apollonia brick  works being built in Obilliq, in the east of the Balkan country, petcoke will be used as the main fuel in the kiln. The Promatic model installed is designed to ­provide...

more