DecoBasic for cutting slips and angle slips

DecoBasic for cutting slips and angle slips

DecoMachines/Verheijen Equipment had a very successful time at Ceramitec. Jos Verheijen and his team were able to convince Netherlands heavy clay producer De Rijswaard that DecoBasic would be a better choice than the used machine that they had offered to them earlier.

Jos Verheijen watched the market intensively all last year and is now offering, through his new company, market-appropriate, low-cost machines for cutting fired bricks and for machining the faces of extruded clay columns …

More details available on

Related articles:

Issue 2012-05 Ceramitec comes too early for

New DecoCircle slip cutter to be introduced in summer

At Ceramitec 2009, Deco­- successfully introduced the new DecoBasic slip- and slip return cutter onto the market. Following this, started the R&D for the new line of...

Issue 2016-8

Water-struck brick slips – easy production in a DB-Multi

In this talk, a solution devised by Petersen/De Boer for the direct wet production of brick slips will be explained. With this solution, material loss is minimized or eliminated completely, in...

Issue 2012-7-8

System for laying brick slips and clay pavers from WKB Systems

The plant supplier presented the prototype of a robot system for laying brick slips and clay pavers. The robot can lay all commercially available brick slip sizes, at a rate of more than 1100 brick...

Issue 2016-1

New De Boer plant for the production of soft mud brick slips

The Dutch phrase “ceramic wallpaper” has existed for several decades. This expresses that a wall also has an aesthetic function in addition to its purely structural purpose. In most cases, such a...

Issue 2018-2 Wassmer Gruppe | B5, 239/342

Brick machining systems

For clay building materials, including brick slips and facade panels, Wassmer supplies an extensive range of equipment: From the manually loaded one-sided brick slip saw to the fully automated...