Successful commissioning of new plants by Capaccioli

Start of production at Ceramica S.A. in Iasi

Capacciolimpianti announces that the new production plant for bricks of the Brikston brand supplied to Ceramica S.A. in Iasi, Romania, has been successfully started up on schedule. The plant has a daily output capacity of 750 t of hollow bricks with the possibility of increasing to 900 t. This is the second complete plant supplied by Capacciolimpianti to Cerami­ca Iasi, which was very satisfied with the excellent results gained with the first plant (30% production increase with only 0.5% scrap).

The new complete plant consists of:

Robotized setting machine for loading dry products onto the kiln cars

Unloading machine for fired material and robotized packaging line

Continuous dryer with ventilation on both sides of the cars and with rotating trays for optimum orientation of the products during the drying process

Tunnel kiln (7 metres wide) with light kiln cars, very high insulation and smoke emissions monitoring

High-precision cutting line with calibration of perpendicular cut

The result is a highly auto­matized and extremely flexible plant with a low personnel requirement. The plant produces a high-quality building material with dimensional precision and a bright, homogeneous colour.

 

Unloading and packaging plant for Briqueterie La Tafna (Tlemcen, Algeria)

For the first time in Algeria, the companies of the Group have installed two unloading lines with packaging of fired material without pallets. The packs are formed with two central holes in order to allow a forklift to lift up the pack and store it.

The two lines were supplied to Briqueterie La Tafna in Tlemcen (Algeria). The customer was very impressed by the good performance of the machinery and the professionalism of the Capaccioli staff. Each line has a production capacity of 700 t/day.

 

Capaccioli also supplies clay preparation plants

With its highly skilled and experienced staff of engineers, Capaccioli has now designed and constructed machines for clay preparation. The first machine built which is about to be installed is the extruder named Aral 650 (in honour of Araldo Capaccioli, the founder of the company and father of the present General Manager, Eng. Stefano Capaccioli).

The machine is the result of over 30 years of direct experience in the heavy clay industry and is the first machine of a complete range of preparation equipment, now at an advanced stage of design, ranging from roller mills, fine roller mills, mixers and filter mixers to clay crushers.

Capacciolimpianti is at present building a new production unit for the construction and assembly of the complete range of preparation machines. This means a very large investment for the Capaccioli Group, which will become a leader in the clay industry as it will be able to offer to the market a complete product range from the quarry through automation equipment, dryers, kilns and burners up to the storage of fired material and post-sales assistance.

Capacciolimpianti is convinced that it shall be able to fulfil the different requirements of the worldwide customers to their full satisfaction. 

 

x

Related articles:

Issue 2016-4

Capaccioli starts Zozik brick plant project in Erbil

In March 2016, the first deliveries for the “Zozik Brick Plant” project were sent on their way. The first 32 trailers arrived on site in Erbil where site operations for plant construction are...

more
Issue 2012-09

Capaccioli presents Super Fine roller mill

With the addition of the Aral series machines for clay preparation to its product portfolio, ­Capaccioli is presenting itself to the world market as a flexible supplier of turnkey plants. These are...

more
Issue 2013-04

The Capaccioli Group’s projects

Over recent months, the Capaccioli Group has successfully installed or commissioned several machines and plants: › Test run at Cersanit In July 2012 the preparation plant at Cersanit, Romania,...

more
Issue 2017-2 Capaccioli

Condor dryer working in Algeria – for a new range of blocks and hollow bricks

Capaccioli has delivered a new 600 t/day plant to the Algerian company Briqueterie Nour in Tlemcen for the production of hollow and thermal bricks. For the first time in Algeria, a complete plant has...

more
Issue 2011-7-8

Successful orders for Capaccioli Second Aral 650/S extruder delivered to brick producer Kilsan SA

Capaccioli has delivered the second Aral 650/S extruder to Kilsan SA, Istanbul, one of Turkey’s leading brick producers, within the contractually agreed term. The machine was supplied just six months...

more