Verdés – clay extrusion experts for over 80 years

The long-standing Spanish firm, Talleres Felipe Verdés built its first extruder over 80 years ago, although at that time extruders were not designed with trough and vacuum chamber. This machine worked on the principle of an Archimedes’ screw. A rotating helical surface transported clay along a cylindrical shaft of varying cross-section to finally shape the clay through a die.

Over time, other elements were added, such as the mixer unit. In 1967 the first Monobloc extruder was presented. This offered crucial advantages with regard to accessibility, maintenance and, above all, lower cost and energy consumption.

In the early 1990s, Combi extruder models were introduced. Their main innovation was a mixer unit separate from the auger body. The performance of this model of extruder was the best to date and ensured optimal energy efficiency. This model was launched to market at the same time as the first frequency inverter applications.

Since then, both Monobloc and Combi models have been steadily developed in line with their core operating principle.

Monobloc extruders are mainly known for their compact and efficient design featuring a single motor for the mixing and extrusion processes. The proprietary-design parallel shaft reducer and helical gears control the three main mixing and extrusion axes, delivering the perfect synchronism required for ideal extrusion. The Monobloc series ranges from a laboratory extruder featuring Ø 75 mm augers to units with Ø 700 mm augers that reach outputs of 45 m3/h.

In 2013, Talleres Felipe Verdés launched the new Magna extruders range, featuring several enhancements compared to the Combi model. Following a couple of years of operation, the customers have rated them very highly. The further developments include an improved efficiency of the equipment and optimized machine maintenance:

new paddle geometry
improved access to the vacuum chamber
auger body protector without bored holes
addition of electrical pressure sensor
easy replacement of wear parts

Now, all these improvements have also been implemented on the Monobloc extruders, thus completing the range of Talleres Felipe Verdés extruders and resulting in a qualitative leap forward for the equipment.

Talleres Felipe Verdés, S.A.


Related articles:

Issue 2/2017

Magnabloc – a new series of vacuum extruders

Celebrating the 50th anniversary of its first Monobloc extruder, Talleres Felipe Verdés has launched a redesigned version of this popular extruder range. This adopts key upgrades of the recently...

Issue 01/2014

Verdés launches its new Magna series of vacuum extruders

Talleres Felipe Verdés has launched its new Magna series of vacuum extruders. This is a natural evolution from the Combi line, which will be gradually replaced by this new family of extruders. The...

Issue 05/2015

Talleres Felipe Verdés opens new laboratory in Vilanova del Camí

The Spanish company Talleres Felipe Verdés is reinforcing its commitment to service and client-optimized solutions with the opening of new laboratory facilities. The event was attended by all the...

Issue 05/2014

Talleres Felipe Verdés, S.A.

Talleres Felipe Verdés, S.A., one of the leading manufacturers of equipment for clay preparation and shaping, will present its new range of Optima roller mills. Roller mills are crucial for...

Issue 2/2019 Talleres Felipe Verdés, S.A.

Verdés Magna series of extruders highly successful on the market

Verdés launched a new series of extruders, the Magna series, around four years ago. This series soon became a success, with the first units being installed already in 2014. For several years,...