Talleres Felipe Verdés, S.A.

Choosing the right homogenization machine

Suitable solutions are described for the homogenization process in the heavy clay industry and the specific features of various machines explained. Objective of the article is that ceramic manufacturers can choose the homogenization method best suited to their needs.

1 Introduction

Verdés offers a range of different solutions for the same application, depending on market demand, as in the different regions there is different know-how, trusted solutions are applied, and other possibilities often ignored.

In [1], an overview is given on the application of various comminution machines in heavy clay ceramics and both wet and dry preparation discussed. This article describes the selection of suitable machines for the homogenization process.

2 Homogenization process

Like for the comminution process, machinery manufacturers offer different equipment for mixing and...

Related articles:

Verdés installs A-750-F filter mixer and a Magna 675 extruder in Belgium

This year, Verdés has installed a new filter mixer and a new extruder to replace existing units at the Belgian company Dumoulin Bricks. It supplied an A-750-F filter mixer and a Magna 675 extruder....

High-capacity double-shaft mixer model 046-S from Verdés 

High-performance equipment for clay preparation in the brick and tile industry

Boasting a throughput rate exceeding 180 t/h, the 046-S double-shaft ­mixer has one of the largest capacities in the Talleres Felipe Verdés portfolio. The 046-S unit is an open double-shaft mixer...


Verdés – clay extrusion experts for over 80 years

The long-standing Spanish firm, Talleres Felipe Verdés built its first extruder over 80 years ago, although at that time extruders were not designed with trough and vacuum chamber. This machine...


Craven Fawcett supplies new machinery to Nigeria

The British firm Craven Fawcett Limited, based in Wakefield, West Yorkshire, has recently supplied a Nigerian Company with a new Centrim 410 extruder and rotary plastic feeder as part of a clay...


New projects spur Verdés’ growth

2010 was a very significant year for Talleres Felipe Verdés. Working to full capacity in sales and production and with new projects, this 100-year-old company was able to consolidate its leadership...